Fulvia 1 unit
Maximum length (S): 6,500 mm (from the wall to the external face of the column)
Maximum width (L): 5,000 mm
Maximum height of the front column (H1): 3,000 mm
Cover inclination (from a horizontal angle): MINIMUM OF 15%
PROTECTION FROM SUN AND RAIN
Regulation of solar radiation thanks to the properties of the fabric and its automated functioning.
The system utilises sealed joints between the fabric and the profiles, forming a waterproof system that can be used even on the rainiest days.
MODULARITY
Up to 3 units can be joined together to adapt to the needs of any type of installation.
MAJOR BENEFITS FOR THE INSTALLER
It is easy to assemble and allows for fast inspection and maintenance. Fulvia leaves our facilities entirely readymade, making installation faster and easier.
REQUIRED INCLINATION
It needs to be installed at a minimum inclination of 15% to allow for evacuation of continual torrential rain at approximately (108 l/m2)/h, as per the EN 12056-3:2000 standard.
PERFECT LIGHTING
The new protection system allows for the installation of LED lighting that is distributed throught the fabrics profile and that highlights its attractive appearance.
THE BEST MATERIALS GUARANTEED
Components made from aluminium and 304 stainless steel guarantee resistance to outdoor elements and corrosion.
| 1 MODULE | 2 MODULE | 3 MODULE | |
|---|---|---|---|
| Maximum length (S) | 6,500 mm (from the wall to the
external face of the column) |
||
| Maximum width (L) | 5.000 mm | 9.000 mm | 13.000 mm |
| Maximum height of the front column (H1) | 3.000 mm | ||
| Cover inclination (from a horizontal angle) | MINIMUM OF
15% |
||
The obtained results in the laboratory of Giménez Ganga, result in class 3 according to EN 13561: 2004 + A1: 2008. in the laboratory of Giménez Ganga, result in class 3 according to EN 13561: 2004 + A1: 2008.
| CLASSES | V-0 | V-1 | V-2 | V-3 |
|---|---|---|---|---|
| Nominal pressure of trial (Pa) or (N/m2) | <40 | 40 | 70 | 110 |
| Security pressure 1.5p (Pa) or (N/m2) | <48 | 48 | 84 | 132 |
| Security pressure velocity 1.5p (Km/h) | <31 | ≈31 | ≈42 | ≈53 |
– io technology from Somfy
For the installation of Fulvia the inclusion of wind sensors is essential, with sun sensors being optional.
As standart, Fulvia includes a mini cover to protect the motor and mechanisms.
As an optional extra, you can have a complete cover installed which will cover all of the cross bars with the awning rolled up.
We have merged the supports to simplify the installation and improve the appearance. From the side view only the beam and the column are visible, due to the cover is located within the profile.
It is possible to install the lateral cross bar with the P-150x125 mm beam, for a glass curtain, Wind Screen or vertical awnings.
With free-flow drainage the water will drain throught the front columns through a purpose-made opening.
A canal leading to a concrete slab outlet allows the rain water to be drained then removed later.
While constructing the concrete slab outlet, prior to installing the pergola, you will need to take into account pre-installation of the drainage tubes (Ø 75 mm).
The rubber seals prevent the passage of water through the space between the profile and the fabric, guaranteeing a watertight seal.
This system allows you to regulate the tension of the transmission strap in just a few seconds, in a simple and intuitive way.
Longitudinal LED lighting can be installed either on the movable cross bars, the water drain or the fixed cross bars (optional), allowing for configuration of the lighting:
- Pergola rolled up
- Pergola extended
With simple movable cross bars you can install white LED lighting with neutral or warm tones. On the water drain and fixed cross bars you can install white or RGB coloured LED lighting.
The wiring will be hidden within the structure.
As standart, Fulvia includes a mini cover to protect the motor and mechanisms.
As an optional extra, you can have a complete cover installed which will cover all of the cross bars with the awning rolled up.
We have merged the supports to simplify the installation and improve the appearance. From the side view only the beam and the column are visible, due to the cover is located within the profile.
It is possible to install the lateral cross bar with the P-150x125 mm beam, for a glass curtain, Wind Screen or vertical awnings.
With free-flow drainage the water will drain throught the front columns through a purpose-made opening.
A canal leading to a concrete slab outlet allows the rain water to be drained then removed later.
While constructing the concrete slab outlet, prior to installing the pergola, you will need to take into account pre-installation of the drainage tubes (Ø 75 mm).
The rubber seals prevent the passage of water through the space between the profile and the fabric, guaranteeing a watertight seal.
This system allows you to regulate the tension of the transmission strap in just a few seconds, in a simple and intuitive way.
Longitudinal LED lighting can be installed either on the movable cross bars, the water drain or the fixed cross bars (optional), allowing for configuration of the lighting:
- Pergola rolled up
- Pergola extended
With simple movable cross bars you can install white LED lighting with neutral or warm tones. On the water drain and fixed cross bars you can install white or RGB coloured LED lighting.
The wiring will be hidden within the structure.
TYPES OF ASSEMBLY
Maximum length (S): 6,500 mm (from the wall to the external face of the column)
Maximum width (L): 5,000 mm
Maximum height of the front column (H1): 3,000 mm
Cover inclination (from a horizontal angle): MINIMUM OF 15%
Maximum length (S): 6,500 mm (from the wall to the external face of the column)
Maximum width (L): 9,000 mm
Maximum height of the front column (H1): 3,000 mm
Cover inclination (from a horizontal angle): MINIMUM OF 15%
Maximum length (S): 6,500 mm (from the wall to the external face of the column)
Maximum width (L): 13,000 mm
Maximum height of the front column (H1): 3,000 mm
Cover inclination (from a horizontal angle): MINIMUM OF 15%
Contact us, we will be happy to help you